Material

Material Properties

Maximum Working Temp.

 Ultimate Tensile Range (ksi min)

Modulus of Elasticity, psi 10⁶

Approx. Design % of Ultimate Tensile (torsional)

Common Sizes (inches)

Inconel

X-750 Bar

 ASTM B637

UNS N07500

Cold drawn.  Good corrosion resistance.  Good for use in elevated temperature applications. Good for use in Sour-Gas applications.

700°F

170

(E) 29

(G) 11.2

45%

.750" to 2.500"

Bar Dia., in.

Bar Dia., in.

Bar Dia., in.

Bar Dia., in.

.750

1.125

1.375

2.250

.812

1.150

1.500

2.500

.956

1.187

1.625

.968

1.312

1.750

Alloy

Heat Treatment

Tensile Strength,

min, psi (Mpa)

Yield Strength

(0.2% offset), min, psi (Mpa)

Elongation in 2 in. (50 mm) or 4D, min, %

Reduction of Area, min, %

Brinell Hardness

N07750 Type 2^c

solution at 1800°F (982°C) + precipitation harden

170,000

(1170)

115,000

(790)

18

18

302 to 363

COMMENTS:

Material is produced in either the solution annealed or solution annealed/aged condition.    This

specification only requires that minimum strength values be met.  If necessary check with a Suhm

representative to attain actual capabilities for tensile and yield.  Aging time and temperatures are

extensive (20 Hrs. @ 1300ºF) to produce the required strengths.

Bar lengths in general will average 12’ to 14’; however, Suhm maintains a stocking arrangement to

have available 10’ - 20’ lengths on some sizes. Some sizes are available in lengths up to 35'.