T-316 Stainless Steel Bar
printer-friendly version - back to material properties chart
General Information |
|||||||||
Material |
Material Properties |
Maximum Working Temp. |
Ultimate Tensile Range (ksi min) |
Modulus of Elasticity |
Approx. Design % of Ultimate Tensile (torsional) |
Common Sizes (inches) |
|||
T-316 Stainless Steel Bar |
Cold drawn. Better corrosion resistance than 302/304. Good for elevated temperatures. No magnetism. |
550°F |
245/110 |
(E)28 |
40% |
.562" to 1.750" |
|||
Bar Sizes (Diameter in Inches) |
|||||||||
.562 |
.593 |
.625 |
.656 |
.687 |
.750 |
.812 |
.875 |
.906 |
.938 |
.968 |
1.000 |
1.063 |
1.125 |
1.188 |
1.250 |
1.313 |
1.375 |
1.438 |
1.500 |
1.562 |
1.625 |
1.750 |
|||||||
Tensile Strength |
|||||||||
Diameter |
Minimum Tensile Strength |
Minimum Elongation in 2 inches (50 mm) |
|||||||
Up to 0.750 (19.05) |
125,000 (860) |
12% |
|||||||
Over 0.750 (19.05) to 1.000 (25.40) |
115,000 (790) |
15% |
|||||||
Over 1.000 (25.40) to 1.250 (31.75) |
105,000 (725) |
20% |
|||||||
Over 1.250 (31.75) to 1.5000 (38.10) |
100,000 (690) |
24% |
|||||||
Over 1.500 (38.10) to 1.750 (44.45) |
95,000 (655) |
28% |
|||||||
This data is provided as a reference guide only and is not intended for design purposes. Strength values and sizes are subject to change. Please check with a Suhm Spring representative for confirmation.