Inconel X-750 Spring Tempered Wire
printer-friendly version - back to material properties chart
General Information |
|||||||||
Material |
Material Properties |
Maximum Working Temp. |
Ultimate Tensile Range (ksi min) |
Modulus of Elasticity |
Approx. Design % of Ultimate Tensile (torsional) |
Common Sizes (inches) |
|||
Inconel X-750 Spring Tempered Wire |
Cold drawn, age hardened. Good corrosion resistance. Good for use in elevated temperature applications. Good for use in Sour-Gas applications. |
700°F |
230/180 |
(E)29 |
45% |
.005" to .750" |
|||
Wire Sizes (Diameter in Inches) |
|||||||||
.005 |
.007 |
.008 |
.010 |
.012 |
.014 |
.015 |
.016 |
.018 |
.020 |
.022 |
.023 |
.025 |
.028 |
.030 |
.032 |
.035 |
.038 |
.040 |
.041 |
.044 |
.045 |
.047 |
.050 |
.051 |
.052 |
.054 |
.055 |
.057 |
.058 |
.059 |
.062 |
.072 |
.080 |
.093 |
.099 |
.100 |
.101 |
.105 |
.109 |
.114 |
.115 |
.125 |
.135 |
.144 |
.148 |
.156 |
.162 |
.172 |
.177 |
.182 |
.187 |
.192 |
.207 |
.218 |
.225 |
.234 |
.243 |
.250 |
.262 |
.281 |
.295 |
.312 |
.331 |
.343 |
.362 |
.375 |
.406 |
.437 |
.468 |
.500 |
.531 |
.562 |
.625 |
.750 |
|||||
Suhm Spring Works Wire Specification for Inconel X-750 (SS-X750) |
|||||||||
Suhm Spring Specification |
Heat Treat |
Notes |
|||||||
SS-X750 |
1200°F / 4 Hours Minimum |
Must meet and be certified to AMS-5699E Chemicals Only, Physical Properties are to meet SS-X750. Solution Heat Treat and Original Mill Required NACE MR-01-75 |
|||||||
Physical Properties for Inconel X-750 (SS-X750) |
|||||||||
Diameter |
Minimum Tensile Strength |
Minimum Yield Strength |
Reduction of Area |
Elongation |
|||||
Up to 0.125 (3.18) |
220,000 (1515) |
200,000 (1380) |
20% |
4% |
|||||
Over 0.125 (3.18) to 0.250 (6.35) |
220,000 (1515) |
200,000 (1380) |
20% |
4% |
|||||
Over 0.250 (6.35) to 0.437 (11.1) |
210,000 (1450) |
190,000 (1310) |
20% |
6% |
|||||
Over 0.437 (11.1)to 0.500 (12.7) |
200,000 (1380) |
175,000 (1205) |
20% |
8% |
|||||
Over 0.500 (12.7) |
180,000 (1240) |
160,000 (1100) |
20% |
8% |
|||||
This data is provided as a reference guide only and is not intended for design purposes. Strength values and sizes are subject to change. Please check with a Suhm Spring representative for confirmation.