Inconel 718 Spring Tempered Wire

printer-friendly version - back to material properties chart

General Information
Material		Material Properties			Maximum Working Temp.	Ultimate Tensile Range (ksi min)	Modulus of Elasticity	Approx. Design % of Ultimate Tensile (torsional)	Common Sizes (inches)
Inconel 718 Spring Tempered Wire ASTM B637 UNS N07718		Cold drawn. Good corrosion resistance. Good for use in elevated temperature applications.			1200°F	250/210	(E)29 (G)11.2	45%	.012" to .275"
Wire Sizes (Diameter in Inches)
.012	.014	.015	.016	.017	.018	.019	.020	.021	.022
.023	.024	.025	.026	.027	.028	.029	.030	.031	.032
.033	.034	.035	.036	.037	.038	.039	.040	.041	.042
.043	.044	.045	.046	.047	.049	.050	.051	.052	.053
.054	.055	.056	.057	.058	.059	.060	.061	.062	.063
.064	.065	.066	.067	.068	.069	.070	.071	.072	.074
.075	.076	.077	.078	.080	.082	.083	.084	.085	.086
.087	.088	.089	.090	.091	.092	.093	.094	.095	.097
.098	.099	.100	.102	.105	.107	.109	.110	.112	.113
.115	.118	.120	.122	.125	.127	.128	.129	.135	.138
.138	.140	.141	.142	.144	.148	.156	.157	.162	.165
.170	.172	.177	.179	.180	.182	.187	.192	.200	.202
.207	.218	.225	.234	.244	.250	.262	.275

Comments
There is not a specification which covers tensile/yield values for Inconel 718 Spring Tempered Wire, but they should be comperable to Inconel X750. Larger sizes of this material can be obtained in spring tempered condition. Check with a Suhm representative for further information.

This data is provided as a reference guide only and is not intended for design purposes. Strength values and sizes are subject to change. Please check with a Suhm Spring representative for confirmation.