Inconel 600 Wire
printer-friendly version - back to material properties chart
General Information |
|||||||||
Material |
Material Properties |
Maximum Working Temp. |
Ultimate Tensile Range (ksi min) |
Modulus of Elasticity |
Approx. Design % of Ultimate Tensile (torsional) |
Common Sizes (inches) |
|||
Inconel 600 Wire |
Cold drawn. Good corrosion resistance. Good for use in elevated temperature applications. (details) |
700°F |
205/120 |
(E)29 |
45% |
.005" to .750" |
|||
Wire Sizes (Diameter in Inches) |
|||||||||
.005 |
.007 |
.008 |
.009 |
.010 |
.012 |
.014 |
.015 |
.017 |
.018 |
.021 |
.022 |
.025 |
.032 |
.045 |
.050 |
.054 |
.062 |
.072 |
.080 |
.093 |
.105 |
.114 |
.125 |
.135 |
.148 |
.156 |
.162 |
.177 |
.187 |
.192 |
.207 |
.225 |
.243 |
.250 |
.312 |
.343 |
.375 |
.406 |
.437 |
.500 |
.562 |
.625 |
.750 |
||||||
Tensile Strength |
|||||||||
Diameter |
Minimum Tensile Strength |
Maximum Tensile Strength |
|||||||
Annealed |
|||||||||
Under 0.032 (0.81) |
80,000 (550) |
115,000 (795) |
|||||||
0.032 (0.81) and over |
80,000 (552) |
105,000 (724) |
|||||||
Cold-Worked, Regular Temper |
|||||||||
All Sizes |
120,000 (830) |
165,000 (1140) |
|||||||
Cold-Worked, Spring Temper |
|||||||||
Up to 0.057 (1.45) |
185,000 (1275) |
- |
|||||||
Over 0.057 (1.45) to 0.114 (2.90) |
175,000 (1205) |
- |
|||||||
Over 0.114 (2.90) to 0.229 (5.82) |
170,000 (1170) |
- |
|||||||
Over 0.229 (5.82) to 0.329 (8.36) |
165,000 (1140) |
- |
|||||||
Over 0.329 (8.36) to 0.375 (9.53) |
160,000 (1100) |
- |
|||||||
Over 0.375 (9.53) to 0.500 (12.7) |
155,000 (1070) |
- |
|||||||
Over 0.500 (12.7) to 0.563* (14.3) |
140,000 (965) |
- |
|||||||
* - Specifications are not given for sizes greater than 0.563.
This data is provided as a reference guide only and is not intended for design purposes. Strength values and sizes are subject to change. Please check with a Suhm Spring representative for confirmation.