Elgiloy Spring Tempered Wire
printer-friendly version - back to material properties chart
General Information |
|||||||||
Material |
Material Properties |
Maximum Working Temp. |
Ultimate Tensile Range (ksi min) |
Modulus of Elasticity |
Approx. Design % of Ultimate Tensile (torsional) |
Common Sizes (inches) |
|||
Elgiloy Spring Tempered Wire |
Cold drawn. Very high fatigue strength and long life. |
600°F |
350/220 |
(E)29.5 |
45% |
.005" to .750" |
|||
Wire Sizes (Diameter in Inches) |
|||||||||
.005 |
.007 |
.008 |
.009 |
.010 |
.012 |
.013 |
.014 |
.015 |
.016 |
.017 |
.018 |
.021 |
.022 |
.023 |
.024 |
.025 |
.028 |
.030 |
.031 |
.032 |
.035 |
.037 |
.040 |
.041 |
.044 |
.045 |
.047 |
.048 |
.049 |
.050 |
.051 |
.054 |
.055 |
.058 |
.060 |
.062 |
.065 |
.067 |
.072 |
.073 |
.080 |
.085 |
.089 |
.091 |
.093 |
.098 |
.100 |
.105 |
.107 |
.109 |
.110 |
.113 |
.114 |
.120 |
.125 |
.135 |
.141 |
.142 |
.148 |
.155 |
.156 |
.162 |
.172 |
.177 |
.187 |
.192 |
.200 |
.207 |
.218 |
.225 |
.242 |
.243 |
.250 |
.263 |
.250 |
.263 |
.275 |
.306 |
.307 |
.312 |
.331 |
.343 |
.375 |
.406 |
.437 |
.468 |
.500 |
.531 |
.562 |
.625 |
.750 |
||||||||
Suhm Spring Works Elgiloy Wire Specification |
|||||||||
Specification |
Heat Treat |
Notes |
|||||||
SS - Elgiloy |
980F Min. / 5 Hrs. Min. |
Must meet and be certified to AMS-5834A chemicals only. Physical properties are to meet SS-Elgiloy. Solution Heat Treat and Original Mill Required NACE MR-01-75 (55.0 HRC Max.) |
|||||||
Physical Properties for SS - Elgiloy, After Drawn and Aged |
|||||||||
Diameter |
Minumum Tensile Strength |
Minimum Yield Strength |
Minimum Elongation % |
Reduction of Area |
|||||
0.001 (0.025) to 0.005 (0.127) |
330,000 (2275) |
290,000 (2000) |
1.5% |
- |
|||||
Over 0.005 (0.13) to 0.100 (2.54) |
300,000 (2070) |
290,000 (2000) |
1.5% |
- |
|||||
Over 0.100 (2.54) to 0.125 (3.17) |
290,000 (2000) |
280,000 (1930) |
4% |
20% |
|||||
Over 0.125 (3.17) to 0.170 (4.32) |
290,000 (2000) |
280,000 (1930) |
4% |
20% |
|||||
Over 0.170 (4.32) to 0.250 (6.35) |
260,000 (1790) |
240,000 (1655) |
4% |
20% |
|||||
Over 0.250 (6.35) to 0.437 (11.10) |
240,000 (1655) |
230,000 (1585) |
6% |
20% |
|||||
Over 0.437 (11.10) to 0.562 (14.27)* |
230,000 (1585) |
220,000 (1550) |
8% |
20% |
|||||
* - Specifications are not given for sizes greater than 0.562.
This data is provided as a reference guide only and is not intended for design purposes. Strength values and sizes are subject to change. Please check with a Suhm Spring representative for confirmation.