Titanium 6A1-4V
printer-friendly version - back to material properties chart
General Information |
|||||||||
Material |
Material Properties |
Maximum Working Temp. |
Ultimate Tensile Range (ksi min) |
Modulus of Elasticity |
Approx. Design % of Ultimate Tensile (torsional) |
Common Sizes (inches) |
|||
Titanium 6Al-4V |
Age hardened. Good ductility and toughness. Good fabricability, and good resistance to general corrosion. |
- |
165 |
(E)15.0 |
40% |
.020" to .250" |
|||
Wire Sizes (Diameter in Inches) |
|||||||||
.020 |
.022 |
.024 |
.025 |
.026 |
.028 |
.033 |
.036 |
.037 |
.038 |
.040 |
.045 |
.062 |
.069 |
.080 |
.090 |
.105 |
.127 |
.135 |
.142 |
.162 |
.163 |
.170 |
.177 |
.193 |
.225 |
.250 |
|||
Tensile Strength |
|||||||||
Diameter |
Minimum Tensile Strength |
Minimum Elongation in 2 inches (50 mm) |
|||||||
Up to 0.500 (12.70) |
165,000 (1140) |
10% |
|||||||
This data is provided as a reference guide only and is not intended for design purposes. Strength values and sizes are subject to change. Please check with a Suhm Spring representative for confirmation.